>>>>

Tuesday, March 23, 2010

Oohhh! An Oldie!


Trying to find the right "red" for the inner border of a project I'm working on....look at this goodie! You know it's old when it's only 36" wide! I don't suppose anyone can pin-point the date on this? 60s? Anyone? When did fabric go to 44" wide?

I love how this blends in with so many of the reproduction fabrics that are floating around out there. Some old calicoes are just timeless, aren't they?

17 comments:

  1. I couldn't tell you a real date other than I would say 60s or older for sure. I know there was still 36" wide fabric around in the late 60's-early 70's because patterns still gave yardage for 36" wide fabric and 44-45". That is a very cool piece of fabric!

    ReplyDelete
  2. That does seem like a perfect "Bonnie quilt" fabric. It must have been a little bit hard to cut into it.

    ReplyDelete
  3. An Oldie? really? I never would have guessed. It looks like one from the CW section at the LQS ;)

    Bonnie, you're right - calicoes are timeless ;)

    Love from Texas! ~bonnie

    ReplyDelete
  4. I have a piece the same design (36") wide but in a turquoise shade. It was in my mom's stash and I have no idea how long it had been there. She passed away in 1972. Timeless is right

    ReplyDelete
  5. As I was reading your post, I was thinking that fabric came in 3 widths 36,45 and 60. I seem to remember there being the different widths on patterns. Maybe I'm thinking of something else altogether but that's what I remember. And I'm not that old either.

    ReplyDelete
  6. 36 inch wide fabrics were still on the market in the mid to late 70s
    Marge

    ReplyDelete
  7. Hey Bonnie,
    I have a question...please don't think I am a quilt police or something...this is more just curiosity! When you come across fabrics that are obviously old and such how concerned are you about content? When fabric was 36" wide, was it 100% cotton? Or a blend? Thanks for all of your inspiration!
    hugs
    tricia

    ReplyDelete
  8. Wow! Where did you find the red treasure?!? When I was 11 (in 1971), you could still buy calico fabric at Hancock Fabrics in Birmingham, Alabama that came on 36-inch bolts. I was learning to sew, and the Simplicity patterns stated yardage needed based on either 36, 44/45, or 60 inch wide fabric.

    Wow...maybe this makes ME an antique!!

    ReplyDelete
  9. Hey Bonnie...its hard to determine the age of fabric, 44 inches came on the market in the late 50's, however, 36 was still being made into the late 70's. To me your fabric looks like late 60's to early 70's.

    ReplyDelete
  10. Unfortunately, I don't know the answer to your question, but I love your fabric!

    ReplyDelete
  11. I worked in a fabric store here in Australia in 1988, which sold "craft prints" which were 90cm (36") wide. They were the only "quilting" fabrics that particular chain of stores sold at the time.

    ReplyDelete
  12. You know, I had totally forgotten fabric used to be 36 inches wide!!

    Thanks for the trip down memory lane!!

    ReplyDelete
  13. Pretty fabric! I started sewing (clothing) in the late 1960's and most fabric was 45" wide by then. Since your fabric is older, I'd suggest you test it. Try gently tearing it width-wise, and if it easily tears you may consider not using it. Louise

    ReplyDelete
  14. Corr on last post...I meant to say try tearing it lengthwise, not width wise. I'm sure for an inner border, though, it should be fine. (And just who do I think I am, giving sewing advise to Bonnie!!! :)
    Louise

    ReplyDelete
  15. I was interested in how old it could be and found this page about vintage fabric
    http://www.fabrics.net/joan1000.asp
    says 42 inch came in towards the end of the 50s. Can you remember where it came from, a friend or family?

    ReplyDelete
  16. Anonymous9:44 AM EDT

    Well, good taste never goes out of style! ;-) Love that red.

    ReplyDelete
  17. If you wish to test fiber content, do the "burn" test. Take a small piece of the fabric and CAREFULLY light the edge with a match. If it melts and forms a hard edge, it has synthetic fibers. If it flames and forms ashes, it is a natural fiber. I do this in an ashtray for safety.

    ReplyDelete

If you are commenting as "anonymous" please leave your name at the end of your comment.

Did you know that ad space on this blog provides for all of the free patterns and free mysteries and challenges at no cost to you? Without ads, this blog would not be possible.

Thank you for understanding the many hours that go into this blog 6 days a week, 52 weeks a year. :)