>>>>

Wednesday, June 01, 2005

Old Tobacco Road, Part 5!

Old Tobacco Road!

~A Quiltville Mystery Quilt!!~

Part 5
(Click here for printer-friendly html version)
(click here for .pdf file)

© Bonnie K Hunter.


On To the Borders!


So,Whaddya Think? :cD

For this step, we are going to use the Easy Angle and the Companion Angle to make 94 flying geese units that finish at 3"X6". That's a whole Gaggle! If you are sewing with any other method,you will need to do whatever it is with the method you use to come up with geese that finish to this size. They will measure 3.5" X 6.5" before sewing them together.

Geese: Cut 94 Triangles from 3.5" strips, using the 3.5" line on the Companion Angle


Background Triangles: Cut 188 triangles from 3.5" strips using the 3.5" line on the easy angle ruler.

Assembly:


Stitch background triangles to each side of the geese triangles, pressing seams towards the triangles just added.

I find it helpful to chain piece these, doing all the left hand triangles first. I leave the pieces connected to each other and lay them out on my ironing board. With them still connected, it is easy to flip that sky triangle out wards with my fingers and the tip of the iron. I clip them apart AFTER pressing, and then return to the machine to stitch on the remaining triangles to the other side of the big goose triangles.

Piece 4 borders from geese:
Top and Bottom borders: 20 geese each.
Side borders: 27 geese each.

Corner Units:
You should have 8 4 patches and 8 pinwheels left over from assembling the quilt center. This is where you will use them! Make 4 corner Units as shown. Pay attention to the direction the dark squares in the 4 patches are pointing....they all chain towards the outside corner of the quilt. Attach corner units to both ends of the top and bottom Pieced borders.

Measuring to Fit!

This is where my instructions may differ from that of other designers. We all have a "unique" seam allowance factor that we can call our own! *LOL* so instead of cursing and swearing at my quilt center trying to figure out why the math looks right on paper,but wrong on my quilt, I use the inner spacer border to get things to fit MY MEASUREMENTS.
You will also be able to do the same thing here, using that inner border to get your quilt center to fit your pieced border.

First step: Measure the Center!

My quilt center is 57.5" X 78.5"

Remember that we subtract 1/2" from each measurement because that is seam allowance. So really, the center for me measures 57" X 78".

My geese are 3" wide, so I need to do some math to figure out how to build up the top so that each side is divisible by 3". Luckily, all I needed to do was add 3" to the above measurements to get what I need. 57 + 3=60. That works for the top and bottom borders. 60 divided by 3 gave me that 20 geese for the top and bottom border. Same with the length of the quilt..if I add 3" to that 78" I get 81. 81 is divisible by 3 and gives me 27 geese for the length of the quilt.

So what do I do with that 3"??

That 3" is the FINISHED measurement we need to add to the quilt center. So we need to divide that in half. 1.5" + 1.5" =3". So we want a 1.5" FINISHED spacer border to go around the quilt center. Add 1/2" seam allowance to that 1.5" and it will tell you we are going to be cutting a 2" strip to frame the center!

Now this is with MY measurements. You will need to measure your own quilt center and figure out what you have to do to make that measurement divisible by 3" to get the border to fit. It could also entail removing a goose or adding a goose. This is where you have to get a pencil and a piece of paper a measuring tape and do some figuring but it is worth it.

Sometimes...just sometimes...this might even mean that your top and bottom spacer borders might have to be cut a slightly different width than your side borders. On point quilts especially can leave you with strange measurements and you might find you are cutting really odd widths of strips to get a pieced border to fit an on-point quilt. That's okay! We just do a bit of math and figure out what we have to do to make that quilt center's measurement be divisble by the repeat in the border units (In the case of these geese..it is 3")

Adding the borders:


Measure through the center of your quilt from top to bottom. Cut two inner size borders this length. Stitch to quilt center with right sides together, pinning centers and end points and easing where necessary to fit. Be careful. You might find it better to sew with the quilt center against the feed dogs to easy in any weight or fullness from the edge being cut on the bias. Press seams towards the borders just added. Measure across the quilt center from side to side and cut two inner borders this measurement, one is the top, one is the bottom. Attach to the quilt top and bottom in the same way you did the sides, pinning to match centers and ends,and easing where neccessary to fit. Press seams towards the borders just added.

Stitch the two long 27-Geese borders to the quilt sides. The geese chase each other AROUND the quilt, so pin them on so that the left side of the quilt has the geese pointing up, and the right side, pointing down. See pics above!

Press seams towards the inner border.

Add remaining top and bottom 20- Geese borders in the same manner. Press.

Final Border:
I added a 5" cut (4 1/2" finished) border to frame everything and to give the eyes a place to rest after all that busy-ness in the center!

And this is where I tell you to "Quilt and Bind as Desired!!" Mine is still waiting for quilting, and it might be a while before I get to that point!


1 comment:

Anonymous said...

Hi Bonnie. I'm writing to you from Singapore. I was directed to your website by Roslyn Atwood. She had made a no. of your quilts. First, i would like to thank you for sharing your patterns so freely. This is very much appreciated esp. for a novice like me. After reading a few of your patterns, I went to Amazon.com to order the Easy Angle II ruler without realising that the smallest strip it can cut is 2 1/2 inches. I wanted to make the Old Tobacco design and the pinwheels there need 2 inches strips of cloth. Will the pattern turn out just as nice if the pinwheels in Old Tabacco were to be make using 2 1/2 inches strips instead of 2 inches. I know that if I were to use 2 1/2 inches strips, I'll need to adjust size of the brick pieces, the 4 patch and the flying geese. Do you have any tips on how I can adjust these blocks? I really appreciate any comments from you.

Thank you and God Bless
gml
gml448@yahoo.com

Post a Comment

If you are commenting as "anonymous" please leave your name at the end of your comment.

Did you know that ad space on this blog provides for all of the free patterns and free mysteries and challenges at no cost to you? Without ads, this blog would not be possible.

Thank you for understanding the many hours that go into this blog 6 days a week, 52 weeks a year. :)